Collision Simplified
A Workflow-Driven Solution For A Complicated Process
The Collision Workflow Streamlined and Simplified
You’re already taking on the liability — it’s time to consider keeping the work in-house. Utilizing the complete Autel network of reporting,diagnostics, repair, alignment, and ADAS tools will boost revenue and provide a safer and more complete repair for your customers.
Ready To Get Started?
- Estimation &
Repair Plan - Diagnosis
& Repair - Mechanical
Adjustments - Wheel
Alignment - ADAS
Calibration - Post-scan
& Test Drive
Estimation
Develop a complete repair plan
Gaining more visibility into a vehicle’s condition before starting a repair delivers more complete estimating and will help solidify a repair plan.
Inspect, image, and document a vehicle’s brakes, suspension, and steering component condition and measure tire wear with the laser-enabled Autel TBE200.
- Pre-scan:
Identify all ADAS Systems - Alignment Check
- Digital Inspection
- Enter preliminary Body Estimate:
adasThink Report
MSUltra
Advanced Analysis
Diagnostic System
- Split Screen Display
- MaxiFLASH VCMI 5-in-1 Device
- Topology Module Mapping
- ScanVIN / Auto-VIN / Auto-Scan
- 26 Service Features / Bi-Directional
TBE200
Tire Tread
Depth Examiner
- Laser-Enabled; No Tire Removal
- 1.65” Touchscreen Display
- Full Color Display Illustrates Wear
- Compatible with Passenger, Commercial and Off-road Vehicles
ITS600
Handheld TPMS Service
& Diagnostic Tablet
- Complete TPMS and Diagnostics Tablet
- Wireless Touchscreen Tablet Tool
- Compatible With All Known Sensors
- On-Tool DOT Tire Registration
- Batch Program Up to 20 MX-Sensors
Diagnosis & Repair
Identify Diag & Mechanical Issues
Autel MaxiSYS tablets allow for quick and seamless identification of potentially hidden fault codes and issues that can delay a repair.
All systems and module health check including steering and suspension
A comprehensive all-systems scan that provides an overview of the vehicle’s condition to detect any existing faults and identify ADAS components. This is the essential first step toward every successful alignment and ADAS calibration.
Identify all required calibrations from the start
Discover the required calibrations, available tools, and proper safety procedures, all in a matter of seconds. Take your Autel ADAS calibration system to the next level with adasThink identification data.
Mechanical Adjustments
& Electronic Communication
Establish Communications With
New Components
Accurately replace blind spot modules with the ADAS Blindspot Aiming Tool (ADAS BAT), and access asTech OE solutions like coding, reflashing, reinitializing through Autel’s Remote Expert platform.
ADAS BAT – Blind Spot Aiming Tool
The Blind Spot Aiming Tool Kit (P/N: ADASBAT) enables technicians to quickly ensure correct angle alignments for successful calibrations of the Blind Spot sensors. After collision repair, use kit to realign sensors to factory specifications.
Access OEM Services on your Autel Tool
The Autel Remote Expert network allows you to connect with brand-specific Diagnosticians to finish every repair and keep ADAS calibrations in-house.
Wheel Alignment
Prepare the Vehicle For
ADAS Calibration
Return the vehicle back to OEM performance and handling requirements and verify that it’s prepared for proper ADAS calibration. Maximize your efficiency by performing all repairs, alignment, and calibrations on the ADAS Bay Max Lift.
ADAS Bay Max Lift
The ADAS Bay Max is a specialized scissor car lift designed for mechanical repair, wheel alignment, and all systems ADAS calibration in a single standard bay. It features a robust rolling jack beam, a unique flush-mount H Shape and table riser setup for improved wheel alignments, and can transform into a flat 360-degree ADAS calibration area when recessed into the floor.
3D Wheel Alignment with any electronic
component reset
Employing 6 HD position and tracking cameras, the IA900WA performs precise four-wheel alignments to 0.02 Degrees of accuracy. Step-by-step instructions guide the technician through the complete process with illustrated, color-coded alignment status, live readings, and required tools.
ADAS Calibration
IA900
Diagnostics + Wheel Alignment + ADAS Calibration
At the cost of a typical alignment system, the Autel IA900 delivers an All Systems and Module Health Check, Digital Vehicle Inspection, 3D Wheel Alignment, and step-by-step ADAS Calibration instructions in a single system and investment.
The Autel IA900WA is the only system that starts and finishes through the OBD2 connector, beginning with a full Health Check and Digital Inspection. These integrated steps deliver the highest revenue potential, the most comprehensive repair, a safer alignment, and a complete calibration of all effected ADAS systems.
An All-In-One Alignment & ADAS Solution For Today’s Complex Vehicles & Systems
Step-by-step illustrated
calibration instructions
Autel is one of the first manufacturers to bring a complete ADAS calibration frame system to the aftermarket. Our experience and talent for innovation have enabled us to develop an intuitive, knowledge-based solution that allows technicians in every industry to calibrate ADAS components with precision and efficiency.
Post-scan & test drive
Complete the repair & return the vehicle
Fully document all work performed, post-scan report verifies that all systems have been reconnected and are functioning properly and without codes.
Document Important
Information In Real-Time
The IA900WA system guides the technician to document each step in real-time, including the Pre-Scan, visual inspection, tire depth analysis, steering angle sensor reset, alignment, calibrations, and post-scan. Reports can be safely stored on- tablet and through the Autel Cloud report management application and shared with customers or insurance companies via email.
Keep All the
Work In-House
Reduce
Cycle Times
Exceed Customer Expectations
Recommended Packages for Collision Repair
MaxiSYS IA900AST
MaxiSYS IA900AST
Diagnostics + Alignment + Calibration
MaxiSYS ADAS IA900WA with All Systems calibration components and ULTRAADAS tablet package includes the MaxiSYS IA900WA Wheel Alignment and ADAS calibration frame that enables the performance of four-wheel alignment and ADAS component calibration and includes targets, patterns and calibration components to calibrate cameras, radar, LIDAR, Night Vision units and the ULTRAADAS tablet with preloaded Alignment and ADAS software.
- Frame capable of performing 4-Wheel alignment and ADAS calibration
- Includes targets, patterns and calibration components to calibrate cameras, radar, LIDAR, Night Vision units
- Includes 12.7-inch MaxiSYS UltraADAS wireless touchscreen tablet with Alignment and ADAS Calibration software
- Includes 24” touchscreen display that attaches to frame unit that can cast to and from ULTRAADAS
Alternative Package
MaxiSYS IA800 AS 3.0T
All Systems Calibration Package 3.0T
AS30T is an All Systems ADAS Calibration Package that includes the Standard Frame, IA800 positioning system, targets, patterns and components for LDW, ACC, Lidar, Radar, Night Vision, RCW, Lane Watch and AVM system calibrations. Includes MaxiSYS MS909 diagnostic tablet with ADAS software upgrade.This system includes the IA800 optical positioning package that enables rapid vehicle to target positioning and precheck of vehicle alignment.
- All Systems Calibration Package with MS909 diagnostic tablet
- Includes IA800 optical positioning system for rapid positioning
- Includes targets, patterns and components for LDW, ACC, Lidar, Radar, Night Vision, RCW, Lane Watch and AVM system calibrations
- Includes 2- and 5-line lasers, plumb bob, laser-assisted mirror, L-shaped bracket and laser reflector
Collision Shop Space Requirements
For All Systems ADAS Calibration
Although the ideal floorspace for all systems ADAS calibration is a recommended 40′ x 60’, a space that large is not necessarily required. In fact, 98% of All ADAS Calibrations can be performed within a 24’ x 34’ area by repositioning the vehicle within the space.
Minimum Space: 24 x 34
Certain Vehicle Repositioning Required
98% of all ADAS calibrations can be performed within this area by repositioning certain vehicles.
NOTE: It’s the OEM that dictates the space requirements for ADAS calibrations, not the equipment manufacturer.
Forward-Facing Camera Calibration
Blind Spot Radar Calibration
Around View Monitoring Calibration
*Vehicle placement varies by make and model. Percentage of vehicle coverage based on North American automobile sales 2016 – 2022.
Recommended Space: 30 x 45
Limited Vehicle Repositioning Required
98% of all ADAS calibrations can be performed within this area with limited vehicle repositioning for the majority of makes and models.
Forward-Facing Camera Calibration
Blind Spot Radar Calibration
Around View Monitoring Calibration
*Vehicle placement varies by make and model. Percentage of vehicle coverage based on North American automobile sales 2016 – 2022.
Ideal Space: 40 x 60
No Vehicle Repositioning Required
100% of all ADAS Calibrations can be performed within this area without vehicle repositioning.
Forward-Facing Camera Calibration
Blind Spot Radar Calibration
Around View Monitoring Calibration
*Vehicle placement varies by make and model. Percentage of vehicle coverage based on North American automobile sales 2016 – 2022.
How Quickly Can You
Recoup Your Investment?
Calculate Your ADAS Revenue Potential
The complete network of Autel reporting, diagnostics, repair, alignment, and ADAS tools can recoup your investment in as little as 30 days*.
*Return on investment varies based on service volume.
In-Shop ADAS Marketing Kit
Considering the importance of proper calibration and maintenance of ADAS safety systems, and the unfamiliarity of this new technology, effectively communicating this information to drivers can be a challenge.
With this in mind, Autel has created an Intro to ADAS countertop tri-fold brochure and companion poster. Download the print-ready marketing kit below and bring to your local printer.
Contact Our ADAS Experts
Fill out the form below to schedule a free virtual product demo, or for technical questions and training inquires.